seednet:
#/ set device PPPoE:re0		# replace xl1 with your interface	# Dynamic IP Address
set device PPPoE:re1	# replace xl1 with your interface
   set MRU 1492
   set MTU 1492
   set speed sync
   set ctsrts off
   enable lqr 			# monitor line quality 
   set lqrperiod 5
   set dial
   set login
   #add default HISADDR
   add! default HISADDR
   set timeout 0		# 3 minute idle timer (the default)

#/  set authname seednet\#	#YOURLOGINNAME	# Static IP Address
set authname seednet  	#YOURLOGINNAME	# Dynamic IP Address
   set authkey seednet   	#YOURPASSWORD

   set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
   nat enable yes # if you want to forward your lan to the net

   disable dns			# /etc/resolv.conf
#/ disable ipv6cp


#/	hinet
#  set authname 74121xxx@ip.hinet.net
#  set authkey werixxxx